Read Time:48 Second
Another Hacking Storage space that you can have on your Tenere 700
Instructions
1: Remove seat and remove battery
2: Drill 2 6mm holes into the plastic battery tray about 10mm from the metal tray as in the picture below
3: Fit the box tightly with the 2 supplied bolts but without the mud flap.
4: Support the box from underneath tightly and mark the position of the holes and remove the box and drill 2 6mm holes in the box. Refit the box this time with the mudflap in place.
5: Secure the box through the battery box holes with the nut washers and bolts supplied. Nuts and washers go in the box.
6: Replace battery and the lid on the box.
7: To fit the lid, the rear of the lid goes on first and then the tab end snaps into place.
8: Fill your new box with tools or Medical Aid kit..
Happy
100 %
Sad
0 %
Excited
0 %
Sleepy
0 %
Angry
0 %
Surprise
0 %
1
0
Average Rating